A malfunctioning washing machine or clothes dryer in a laundry room is a real inconvenience. Most homeowners are way too busy to have to make a trip to a laundromat near their home. In order to avoid piles of dirty laundry around your home, you will probably want to call a local appliance repair service for washer repair or dryer repair. Choose an affordable, reliable appliance repair company that performs same-day service like Albany Appliance Repair.
We have the proper tools, training and on-the-job experience to complete both basic and difficult repairs in the scheduled service appointment. We load our vans with replacement parts for all major brands of washing machines and dryers – including LG, Kenmore, GE, Sears, Bryant, Carrier, Armstrong, Goodman, Lennox, Amana and more!
The most reoccurring type of washer repair is for loud noises coming out of the washer. Technicians is able to diagnose the reason of the strange sound and decide if we will need to repair or replace the broken appliance parts in the washing machine. The cause of the noise is usually because of a broken pump motor or worn-out belt or bearings.
In the event your washing machine won’t turn on, first take a look to see if it is not plugged in or if a circuit breaker is flipped off. The issue could also be from a broken door latch, timer or thermal fuse. A washer that does not turn on or agitate means the cogs, drive belt, coupler or transmission need repair or need replacement.
A washing machine that does not spin means there’s a problem with the door latch, wax motor or motor coupling. Albany Appliance Repair can fix these problems fast and have your washer spinning again ASAP!
The usual reasons for a washing machine overflowing is the water level pressure switch, water inlet valve or the air dome tube on the machine.
A malfunctioning temperature control switch or inlet hose is often the reason why a washing machine doesn’t produce hot or cold water.
The most common dryer problem is strange noises coming out of the appliance. Broken bearings, seals or worn-down belts often lead to loud sounds from dryers.
A dryer that won’t produce enough heat to dry clothing won’t be very useful. The cause of the problem is likely a broken high-limit thermostat, heating element or cycling thermostat. These same parts can also cause a dryer to be too hot too. The repairman will troubleshoot the machine to determine the issue and solution.
When your dryer will not turn on, you want to be sure the dryer is plugged in and that all of the circuit breakers are on. If the dryer is plugged in and still will not turn on or tumble, the heating element, high limit thermostat or cycling thermostat will likely need to be repaired or replaced.
The exact opposite problem happens when the dryer will not turn off. The reason for this problem is either a broken timer or door switch.
A dryer timer is required to advance in order to complete the drying cycle. If the timer will not advance, it might mean there is a broken cycling thermostat or timer motor.
Copyright ©2019  Albany Appliance Repair